Cross Recessed Countersunk Head Tapping Screws DIN7982 Ss304

Like Screw and Nut, our factory's Bolt is also highly praised by customers.

Countersunk head screws can also be called flat head screws, countersunk head screws, half countersunk head screws, and half countersunk head screws. Generally, countersunk screws are cross-recessed, which is above the national standard specification, the national standard number, that is, the national standard number is GB/T846-1985. Countersunk screws are generally used in electrical equipment, electronic machinery, mechanical equipment, household appliances, Digital products, water conservancy projects, decoration and construction, etc. Countersunk screws are generally made of metal screw wires. After forming, the teeth are rubbed. They are cylindrical and have a flat head, such as an inclined surface around the side of the screw, so that the screw can tightly lock the screw cap or other objects. . Countersunk screws have a larger diameter at the top and can be round or equihexagonal to allow a tool such as a screwdriver or wrench to turn the screw. The more prominent top also keeps the screw from drilling too deep through the material and increases the pressure of the screw on the material. Countersunk screws can usually be removed and retightened at will without loss of efficiency, provide greater strength than nails, and are reusable. On the product material used for the countersunk head screw, the head can sink completely, and the screw head will not act as a hindrance.

Our factory mainly produces Bolt, Nuts, Screws, Threaded Rod, etc.

our company