Stainless Steel Hex Nuts

    There are many kinds of nuts. Our common ones are national standard, German standard, British standard, American standard and Japanese standard nuts. Our company mainly produces and operates national standard and German standard nuts.

    Hexagon nuts are used in conjunction with Bolts and screws to connect and fasten parts. Among them, type 1 hexagonal nuts are the most widely used, C-level nuts are used for machines, equipment or structures with rough surfaces and low precision requirements; A-level and B-level nuts are used for machines with relatively smooth surfaces and high precision requirements , equipment or structure. The thickness m of type 2 hex nuts is relatively thick, and they are mostly used in occasions that often need to be assembled and disassembled. The thickness m of the hexagonal thin nut is relatively thin, and it is mostly used in occasions where the surface space of the connected parts is limited.



    A nut is a fastener with an internal thread and used in conjunction with a Bolt, a mechanical part with an internal thread and used in conjunction with a Screw to transmit motion or power.

    A nut is a nut, a part that is screwed together with a bolt or a screw for fastening. It is an original that all manufacturing machinery must use. There are many kinds of nuts, and our common ones are national standard, British standard, American standard, Japanese standard Standard nuts. According to different materials, nuts are divided into several types such as carbon steel, high-strength, stainless steel, and plastic steel. According to product attributes, the standard numbers corresponding to different countries are divided into ordinary, non-standard, (old) national standard, new national standard, and American system. , Imperial, German standard. Different sizes and unequal threads are divided into different specifications. Generally, the national standard and German standard are represented by M (such as M8, M16), and the American system and British system are represented by fractions or # (such as 8#, 10#, 1/4, 3 /8) Fasteners. Nuts are parts that tightly connect mechanical equipment. They can be connected together through internal threads, nuts and screws of the same specification. For example, M4-0.7 nuts can only be matched with M4-0.7 screws ( In the nut, M4 means that the inner diameter of the nut is about 4mm, and 0.7 means that the distance between two thread teeth is 0.7mm); the same is true for American products, for example, a 1/4-20 nut can only be used with a 1/4-20 screw Matching (1/4 finger nut inner diameter is about 0.25 inches, 20 fingers per inch, there are 20 teeth).

Our Company